Spesifikasi Produk
MULTIPRO WELDING BOOTH Overall dimension (LxWxH): about 1.8m x 1.8m x 1.8m, With Below opening from floor 0.455m, Mild Steel Construction by hallow square pipe, size 2 : 1", These welding partitions bays are made from metal, Suitable for training center, industrial and workshop use, Welding booth must be supply with welding screen, made by heavy duty material (LxWxH) about:1.74m x 1.74m protected arc welding ultraviolet, Certificated EN25980:2015 Moderate UV resistance and transparency, Bays have to be covered with three partitions i.e front, left and right, The bay along the louvered wall side must be located at least 1 feet from the wall in order to facilitate good ventilation system, The welding booth should be fully equipped with support accessories for the ducting fume extractor and the arm mounted horizontally, Welding bay should be supply with electrical installation 3ph 380V 50/60hz x 1 point completed with male and female plug set min 32A, 1ph 220V 50/60hz x 4 point min 10A, Electrical switch box sub MCB 3ph and 1ph must be supply and as 1 control system. every booth must be supply Welding table carbon steel material with attachment for clamping serval welding position 1G-6G for welding process.
Deskripsi Produk
SUPPLY WITH INTERNAL SUCTION ARM
One Unit/Bay Booth Wall or overhead line mounted system, Suction hood stainless steel with safety mesh and quick-fit coupling hood opening: about 12" diameter. The hood can be angle at least 110° in all directions, Max. working radius: about 2 meter, Hose diameter: about 160mm, Airflow at hood- about 800-1200mᵌ/h, Adjustable elbow joint, Inner and outer arm tubing with high temp PVC, Airflow throttle valve, Hose Joint: Flexible hose 4" diameter, Racer bracket 6" to 4": Product Advantage: 'Light Weight and convenient & flexible rotating, all-round, multi-angle accurate positioning it can hover work freely, Easy to disassemble and clean. SUPPLY WITH CENTRIFUGAL EXTRACTION BELT MOTOR SET Attachable to central system, Free Blowing capacity: about 7500 CMH Horse Power: 4 kW, Speed: 1500 RPM: Static Pressure: 950 Pascal, Max Temperature Airflow: 80 Degree Celsius, Voltage: 380V/3ph/50Hz, Blower output attach to building wall with stand, Current Input: Input from isolator to fan motor with power cable protection and safety complete with control panel to support the supply with ON/OFF auto protection and star delta, Hose Joint: Standard attachment required (Inclusive), Heavy Industrial Fan & Motor to work up to maximum harmful smoke and gases, in perfect suction through ducting ducts, and has a function of removing smoke and harmful gases into the air.
SUPPLY WITH CENTRALIZED DUCTING SET (CUSTOM)
Ducting spiral line material galvanized (Length: Custom) will install above welding booth for extraction systems and fan located at the outlet of the ducting to specify with complete plan layout, Fabricate a horizontal chimney, the outlet side motor box with accessories, Standard attachment required (Inclusive): TY, reducer, flexible hose, accessories hangers, clip, bracket and others accessories, Standard attachment required to ensure that the equipment is fully operational upon delivery and commissioning.
